3D Hangouts – Sketch Toy, Zipper Pulls and Walking Robots

This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse this week is a ramp walking robot printed in MatterHackers Quantum PLA filament. Mechanical!

YouTube Video
https://youtu.be/0M7IT2ROX84

Learn Guide
https://learn.adafruit.com/sketch-drawing-toy/

Code on Github
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/CircuitPython_Knob_Sketcher/feather_sketcher/code.py

2.4in TFT FeatherWing
https://www.adafruit.com/product/3315

Feather M4
https://www.adafruit.com/product/3857

16mm momentary push button
https://www.adafruit.com/product/1503

Mini Toggle switch
https://www.adafruit.com/product/3221

2x 10k Potentiometers Linear
https://www.adafruit.com/product/562

1200mAh battery
https://www.adafruit.com/product/258

Short Headers for Feather
https://www.adafruit.com/product/3002

30AWG silicone wire
https://www.adafruit.com/product/2051

Headers Right-Angled
https://www.adafruit.com/product/1540

M2.5 Hardware Kit
https://www.adafruit.com/product/3299

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------