[Bonus] Equipment Considerations for Growing Pulses

Paul Kanning led our panel on “Making Your Farm Equipment Work for you.” Paul is the MPCC Vice Chair as well as a producer from Flaxville, Montana. He was joined by Lowell Harris, a service manager at Torgerson’s LLC, Phil Moodie, a store manager for Front Line Ag, James Neumon, a service manager from Hoven Equipment Company and Mike Kjos, a store manager for C & B Operations. Needless to say, with a panel like this you are going to hear great insight into what the industry standard is for equipment use and management with pulse crops.The first topic of discussion was air seeders and what steps need to be taken to prevent seed coat damage during the seeding process. There was general consensus that slowing down to 1- 1 1/2 per hour to give a pulse producer the best chances of success. James highlights the need for gentle handling and special considerations including a rubber pad to the top of the seed tower to create more cushion for the seeds. While the additional pad is not a factory option it has been gaining traction by word of mouth for better protection of the seed.  Both Lowell and James recommend a well managed and controlled airspeed. Lowell also offered picking specific augers and meter rolls to compliment the other practices. Both Mike and Phil agreed that  using the largest sized tooth sprocket in the meter housing as an additional course of action can add further protection. In addition, consistent ground speed and secondary towers can create a greater seeding consistency. Paul moved on to roller techniques that producers can use to embed rocks. Ensuring good soil conditions such as with a little moisture will make the roller more effective. Also, using your roller as soon after drilling can give you the best results. With the amount of investment and time spent on sprayers in pulse operations, maintenance is a very important part of a sprayers management. Mike discussed changing hub oil regularly and although its time consuming he recommends doing it yearly. James added rinsing off the sprayer after use to avoid rust and damage to the machine. Lowell agreed with the previous recommendations and added greasing the moving parts to keep them in the best working condition. Phil added monitoring the hydraulic lines and the drive line throughout the machine to avoid a fluid transfusion. Some producers are still using swathers rather than applying a desiccant. Phil admits to not having many producers using this technique but suggests managing the flow pressure and the guard angle to make sure it is getting down as low as you can. James added adjusting the draper speed to make sure the crop lays easiest for pick up. James recommends adjusting the flotation of the header to the optimal height being crucial during harvest.  He also recommends paying attention to your guard angle and is very pleased with the technology involved in the flex drapers for pulse growers. Mike reiterated adjusting the flotation of the header to the optimal height. To keep with the theme throughout this panel, Mike highlighted the need for slow and steady progress in the field while operating a draper header. Lowell details different techniques to insure the flotation of the header is properly adjusted. Phil explains different additions for air reel options on flex drapers. The Crary is his preference if you are working a large amount of acres with pulses. Mike agrees that an air reel will pay for itself in the long run for pulse growers especially with a lentil crop. Lowell suggests also exploring a Macdon reel and that producers he has worked with have at times preferred them. James admits he doesn’t have many if any customers using an air reel at this time. He did say many of his producers are finding success with the Macdon reel. Lowell offers that “with any discussion about combine settings, everybody’s got a different opinion and most of...